Equipment with Consistent Quality
|
| Quarry
Duty "AR" Wing Pulley |
|
|
| KEY BENEFITS
|
- Abrasive resistant (Type K-400) 3/4-in. x 2-in. wear bars.
- Full depth keyed hubs and bushings, available in steel.
- Available in several hub/bushings systems.
- 10-in. diameter to 60-in. diameter.
- CCI's_unique
end pipe design.
- 1/2-in. thick wings.
- 3/8-in. gussets
|
| The
Quarry Duty "AR" Wing Pulley is specifically
designed for the most rugged applications where extended life is
essential. The "AR" Wing is constructed with "AR400"
abrasive steel contact bars, where the belt rides on the pulley. The
contact bars are 3/4-in. thick x 2-in. wide, providing unsurpassed
strength. The wings are a minimum of 1/2-in. thick and provide additional
protection against wing folding and premature failure. The "AR" Wing
Pulley also features our unique "end pipe"
design, which reduces wing height and provides another level of protection
against wing folding. The Quarry
Duty "AR" Wing Pulley is
a natural candidate for primary tail sections, surge pile tail sections
and hard-to-reach positions. |
|
|
Quarry Duty
Wing Pulley |
|
|
| KEY BENEFITS
|
- 3/4-in. x 2-in. contact bars for higher load capacity and extended
wear life.
- 3/8-in. wings (never exceeding 7-in. height to prevent "wing
folding"
- 5/16-in.gussetts for maximum end disc thickness submerged-arc welded
internally and externally for additional protection against weld
fatigue.
- CCI's_unique end pipe design for additional
welds and reduced wing height.
|
| The Quarry Duty Wing Pulley features
construction un matched by no other manufacturer in the industry. This
pulley is designed to withstand the most rugged of applications where
extended, maintenance-free life is essential. |
|
|
Mine Duty
Wing Pulley |
|
|
| KEY BENEFITS
|
- 3/8-in. wings
- 5/8-in. x 1-1/2-in. flat bar
- 1/4-in. gussets
|
| The Mine Duty Wing Pulley is the heaviest constructed
in the industry, featuring 3/8-in. wings, 5/8-in. x 1-1/2in. flat bar and
1/4-in. gussets. Each hub submerged arc-welded internally and externally
to prevent failure at the hub weld. Each wing is mig welded not only to
the end pipe, but supported by the gusset material between each wing. On
all pulleys more than 16-in. in diameter, CCI
uses an oversized pipe
end design to reduce the overall wing height. This design helps eliminate
the tendency for wings to fold on contact with large rocks or other
material. |
|
|
Spiral Wing
Pulley |
|
|
| KEY BENEFITS
|
- Wing type or drum type.
- Reverse helixes wrapped around the
outer diameter of the pulley.
- Wing pulley flat bar is under the
spiral for additional protection.
- Flat bar, round bar or square wraps.
|
|
The Spiral
Wing Pulley is designed specifically
fir the ultimate cleaning action in conveyor applications where the build
up is a problem.
The Spiral
Wing Pulley offers
the same aggressive construction as our other self-cleaning wing
pulleys and includes a reverse helix spiral wrap to clean the belt.
Unlike our competitors, we apply the wrap with heavy welds over
the contact bar found on our standard wing pulleys. This Provides
for superior adhesion of the wrap to the pulley. CCI
Spiral Pulleys are offered in standard, heavy, mine and quarry duty
construction, with quick deliveries available. |